Torsion problem with ASTER
- Boloni
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 38
- Thank you received: 0
15 years 10 months ago #3085
by Boloni
Replied by Boloni on topic Re:Torsion problem with ASTER
A new node ? Will it be contained in the Mesh_1 ?
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
15 years 10 months ago #3091
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Torsion problem with ASTER
Actually I must admit it wasn't as easy as I laid it out to be, I just tried and had to resort to the example I have saved on my HD (found it!) - it contains three approaches so you can pick the one that suits you.
Attachment rigid_element.gz not found
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
15 years 10 months ago #3092
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Torsion problem with ASTER
Another one
Post edited by: Claus, at: 2009/06/20 12:58
Won't attach - give the previous post a try<br /><br />Post edited by: Claus, at: 2009/06/20 12:58
Post edited by: Claus, at: 2009/06/20 12:58
Won't attach - give the previous post a try<br /><br />Post edited by: Claus, at: 2009/06/20 12:58
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
- Boloni
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 38
- Thank you received: 0
15 years 10 months ago #3093
by Boloni
Replied by Boloni on topic Re:Torsion problem with ASTER
Thanks Claus, I'll look into it the next week.
- Boloni
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 38
- Thank you received: 0
15 years 10 months ago #3134
by Boloni
Replied by Boloni on topic Re:Torsion problem with ASTER
Is there a way to visualize the groups of the mesh ?
Because I can see the .unv files with GMSH but I don't know how to visualize the groups. With I-DEAS, there are errors at the reading and only some nodes can be seen (version 11 of I-DEAS).
Do you have the .med files ?
Because I can see the .unv files with GMSH but I don't know how to visualize the groups. With I-DEAS, there are errors at the reading and only some nodes can be seen (version 11 of I-DEAS).
Do you have the .med files ?
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
15 years 10 months ago #3145
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Torsion problem with ASTER
You can use Salomé's mesh module to visualize the mesh groups. If you prefer .med format you can convert the mesh file using ASTK mesh convert tool - or load the .unv in Salomé and export it as .med
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Moderators: catux
Time to create page: 0.139 seconds