Salome freeze "checking naming service"

Hi all,

If Salome freeze after starting \"checking naming service\".
Try to reboot after unpluging the network cable.
Same probleme on my 2 pc and same solution.

No problem with the piston tutorial! Great.


Eric

Hi Eric,

thank you for the information, I have never experienced this error, but I will try to find out why it occures.

Could you please give me some details on your network configuration: do you have a router with DHCP or are you using static IP addressing?

Thanks

I have a ADSL modem routeur with DHCP enabled.
My 2 pc have not a static IP adresse.
Internet work under CAELinux.

Then Salome freeze I try to restart Salome, freeze too!

I try to start CAELinux with the flag NOnetwork, but with no success.

I try to start CAELinux with the RJ45 cable out. Salome Work.
Then I plug The RJ45 and restart Salome, freeze too!

Eric

Hi Eric,

thank you for the information. I will try to reproduce this error, but could you please give me more details:

1) try to launch Salome in a terminal: /opt/salome/Salome.sh
2) try to get the following network config info:
cat /etc/resolv.conf
and
ifconfig

What I suspect is a wrong nameserver configuration that I left from an old local network configuration, and that I did not see during testing (tested either not connected at home or connected to my lab's network).

Thank you for your help

Hi,

/opt/salome/Salome.sh (freeze again)

---

[root@dhcppc1 root]# cat /etc/resolv.conf
nameserver 127.0.0.1
nameserver 192.168.1.1
search dhcppc1
.......................................................
[root@dhcppc1 root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:EA:32:08:45
inet addr:192.168.1.34 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:932 errors:0 dropped:0 overruns:0 frame:0
TX packets:920 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:507060 (495.1 Kb) TX bytes:111661 (109.0 Kb)
Interrupt:20 Memory:fb000000-0

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:204 errors:0 dropped:0 overruns:0 frame:0
TX packets:204 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11698 (11.4 Kb) TX bytes:11698 (11.4 Kb)

[root@dhcppc1 root]#

Eric

Hi Eric,

thank you for the info. I can see that your DHCP configuration worked properly.

But concerning SALOME, could you post the messages that you see in the terminal when you start /opt/salome/Salome.sh ?

Thanks.

PS: I have tried to reproduce this error, but no success.