Visualisation of correct BEAM orientation
- Luigi
- Topic Author
- Offline
- New Member
Less
More
- Posts: 19
- Thank you received: 0
15 years 5 months ago #2327
by Luigi
Visualisation of correct BEAM orientation was created by Luigi
Hi to everybody,
When I am postprocessing a BEAM model, I need to understand if the beam orientation I assigned in Aster is correct (i.e. to check if beam section axes are correctly oriented).
But Salomè has only wireframe mode to visualize a beam model.
Is there some way to do it?
If there is no possibility at moment, this is a suggestion to improve it.
Thanks in advance for your help.
Luigi
When I am postprocessing a BEAM model, I need to understand if the beam orientation I assigned in Aster is correct (i.e. to check if beam section axes are correctly oriented).
But Salomè has only wireframe mode to visualize a beam model.
Is there some way to do it?
If there is no possibility at moment, this is a suggestion to improve it.
Thanks in advance for your help.
Luigi
Please Log in or Create an account to join the conversation.
- Claus
- Offline
- Moderator
Less
More
- Posts: 670
- Thank you received: 34
15 years 5 months ago #2328
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Visualisation of correct BEAM orientation
Don't know if I understand you correctly, but you can turn on and off shading for everything and a particular part. Try selecting your beam solid and right-clicking.
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Please Log in or Create an account to join the conversation.
- Luigi
- Topic Author
- Offline
- New Member
Less
More
- Posts: 19
- Thank you received: 0
15 years 5 months ago #2329
by Luigi
Replied by Luigi on topic Re:Visualisation of correct BEAM orientation
Maybe my first message was not correct...
The beam is not a solid, it is a wire, only the axes is displayed. I assigned mechanical characteristics to the section and performed analysis, but in postpro module I can visualize only one axes (or wire).
So, I cannot visualize if section characteristics are correct, for sample, I cannot check if the section axes are correctly oriented (typical error is rotate the section to 90°).
I hope the situation now is clear, thanks a lot for your help.
Luigi
The beam is not a solid, it is a wire, only the axes is displayed. I assigned mechanical characteristics to the section and performed analysis, but in postpro module I can visualize only one axes (or wire).
So, I cannot visualize if section characteristics are correct, for sample, I cannot check if the section axes are correctly oriented (typical error is rotate the section to 90°).
I hope the situation now is clear, thanks a lot for your help.
Luigi
Please Log in or Create an account to join the conversation.
- Claus
- Offline
- Moderator
Less
More
- Posts: 670
- Thank you received: 34
15 years 5 months ago #2331
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Visualisation of correct BEAM orientation
Any chance you can upload the result-files so we can look at it - personally I can't come up with a solution without looking at it
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Please Log in or Create an account to join the conversation.
- Luigi
- Topic Author
- Offline
- New Member
Less
More
- Posts: 19
- Thank you received: 0
15 years 5 months ago #2332
by Luigi
Replied by Luigi on topic Re:Visualisation of correct BEAM orientation
Claus wrote:
Hi Claus, in attachment there is the Beam Test file.
Thanks in advance for your help.
Ciao, Luigi
Any chance you can upload the result-files so we can look at it - personally I can't come up with a solution without looking at it
Hi Claus, in attachment there is the Beam Test file.
Thanks in advance for your help.
Ciao, Luigi
Attachment BeamTest.zip not found
Please Log in or Create an account to join the conversation.
- Claus
- Offline
- Moderator
Less
More
- Posts: 670
- Thank you received: 34
15 years 5 months ago #2334
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Visualisation of correct BEAM orientation
Luigi wrote:
As much as I hate to admit it, I can't help you. I hope someone else sees and downloads the files though
Claus wrote:
Any chance you can upload the result-files so we can look at it - personally I can't come up with a solution without looking at it
Hi Claus, in attachment there is the Beam Test file.
Thanks in advance for your help.
Ciao, LuigiAttachment BeamTest.zip not found
As much as I hate to admit it, I can't help you. I hope someone else sees and downloads the files though
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Please Log in or Create an account to join the conversation.
Moderators: catux
Time to create page: 0.146 seconds