Assembly tolerances
- Michal Nytra
- Topic Author
- Offline
- New Member
Less
More
- Posts: 10
- Thank you received: 0
7 years 3 months ago #8840
by Michal Nytra
Assembly tolerances was created by Michal Nytra
Hello,
does somebody have some materials or tutorials about assembly tolerances? I mean for example when I need assembly shaft and hub and dimension of shaft is bigger than hole dimension of hub ("overlap") or pressing shaft into bearing.
Thanks for replies.
Regards, Michal Nytra.
does somebody have some materials or tutorials about assembly tolerances? I mean for example when I need assembly shaft and hub and dimension of shaft is bigger than hole dimension of hub ("overlap") or pressing shaft into bearing.
Thanks for replies.
Regards, Michal Nytra.
Please Log in or Create an account to join the conversation.
- Claus
- Offline
- Moderator
Less
More
- Posts: 670
- Thank you received: 34
7 years 3 months ago #8990
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re: Assembly tolerances
Hi
Search google / code aster forum for 'interference fitting' and similar. I know this topic has been brought up several times.
/C
Search google / code aster forum for 'interference fitting' and similar. I know this topic has been brought up several times.
/C
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Please Log in or Create an account to join the conversation.
Moderators: catux
Time to create page: 0.134 seconds