Shell construction analysis
- Askemann
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
10 years 2 months ago - 10 years 2 months ago #7947
by Askemann
Shell construction analysis was created by Askemann
Hello.
I try to make an analysis using Salome_Meca.
There is a model of hydraulic gate under hydrostatic pressure.
The study ends with failure.
I atach files to message.
Can everybody tell me when i mistake?
I can't attach archive. Take it HERE
I try to make an analysis using Salome_Meca.
There is a model of hydraulic gate under hydrostatic pressure.
The study ends with failure.
I atach files to message.
Can everybody tell me when i mistake?
I can't attach archive. Take it HERE
Last edit: 10 years 2 months ago by Askemann.
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
10 years 2 months ago #7948
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re: Shell construction analysis
I can't open the mesh file right now, but are you sure you're reorienting surfaces and haven't included some line elements?
Use google translate to translate the error and see where that takes you.
/C
Use google translate to translate the error and see where that takes you.
/C
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
- Askemann
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
10 years 2 months ago - 10 years 2 months ago #7962
by Askemann
Replied by Askemann on topic Re: Shell construction analysis
I try analyse a simple shell-model (I-beam).
I got right resultat from Calculix and wrong resultat from code-aster.
Where is a mistake?
I-beam (Calculix and Hand)
I-beam (Salome_Meca)
I got right resultat from Calculix and wrong resultat from code-aster.
Where is a mistake?
I-beam (Calculix and Hand)
I-beam (Salome_Meca)
Last edit: 10 years 2 months ago by Askemann.
Moderators: catux
Time to create page: 0.131 seconds