ASTK 1.7.1 abnormal abort error 127
- Stuart Holland
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
14 years 5 months ago #5062
by Stuart Holland
ASTK 1.7.1 abnormal abort error 127 was created by Stuart Holland
Hi,
I get the following error code when running
ASTK 1.7.1 either with my own design or when using the Piston tutorial
EXECUTION_CODE_ASTER_EXIT_6756=127
<F>_ABNORMAL_ABORT exit code = 127
I've attached my mesh, comm and astk files.
Can anyone help, I'm on a 64 bit system, and generated the mesh using Salome 4.1.4
Thanks
Stuart
I get the following error code when running
ASTK 1.7.1 either with my own design or when using the Piston tutorial
EXECUTION_CODE_ASTER_EXIT_6756=127
<F>_ABNORMAL_ABORT exit code = 127
I've attached my mesh, comm and astk files.
Can anyone help, I'm on a 64 bit system, and generated the mesh using Salome 4.1.4
Thanks
Stuart
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
14 years 5 months ago #5069
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:ASTK 1.7.1 abnormal abort error 127
just post the .mess file for now, that'll give some indications on what's wrong.
Regards,
Claus
Regards,
Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
- Stuart Holland
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
14 years 5 months ago #5074
by Stuart Holland
Replied by Stuart Holland on topic Re:ASTK 1.7.1 abnormal abort error 127
I've tried to attach the file, but I'm not sure whether I've done it correctly, so I put the contents into a code section below:
[code:1]EXECUTION_CODE_ASTER_EXIT_6756=127
<F>_ABNORMAL_ABORT exit code = 127[/code:1]
Stuartfile:///home/caelinux/Documents/Stuarts_Folders/CAE_Drawings/22001/22001.mess
[file]<br /><br />Post edited by: Stuart Holland, at: 2010/12/10 15:32
[code:1]EXECUTION_CODE_ASTER_EXIT_6756=127
<F>_ABNORMAL_ABORT exit code = 127[/code:1]
Stuartfile:///home/caelinux/Documents/Stuarts_Folders/CAE_Drawings/22001/22001.mess
[file]<br /><br />Post edited by: Stuart Holland, at: 2010/12/10 15:32
- kwou
-
- Offline
- Moderator
-
14 years 5 months ago #5075
by kwou
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
Replied by kwou on topic Re:ASTK 1.7.1 abnormal abort error 127
Hoi Stuart,
not really helpful; we do need the *.mess file. Just try again, it happens now and than you cannot upload the file.
kind regards - kees
not really helpful; we do need the *.mess file. Just try again, it happens now and than you cannot upload the file.
kind regards - kees
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
- Stuart Holland
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
14 years 5 months ago #5088
by Stuart Holland
Replied by Stuart Holland on topic Re:ASTK 1.7.1 abnormal abort error 127
See attached file
Attachment 22001-1dcb72dcb863f0635040e78b2ce8a4e2.zip not found
- Stuart Holland
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
14 years 5 months ago #5091
by Stuart Holland
Replied by Stuart Holland on topic Re:ASTK 1.7.1 abnormal abort error 127
Further to the above, I have downloaded version 2010
and this time the ASTK package seems to have run further, although there does seem to be a problem with the med file as it doesn't finish the calculation. see attached mess file, which this time seems to have a lot more info in it.
and this time the ASTK package seems to have run further, although there does seem to be a problem with the med file as it doesn't finish the calculation. see attached mess file, which this time seems to have a lot more info in it.
Attachment 22001_v4.gz not found
Moderators: catux
Time to create page: 0.147 seconds