×

Notice

The forum is in read only mode.
  1. Forum
  3. Public Forums
  5. Finite Element Modelling - Code_Aster
  7. Printing modal mass and stiffness matr.

Printing modal mass and stiffness matr.

  • Alexandre Marks Löw
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 years 5 months ago #4982 by Alexandre Marks Löw
Printing modal mass and stiffness matr. was created by Alexandre Marks Löw
Hello people again...

This time i need to print the resulant mass and stiff. matrices of a modal analysis... could someone help me in this task?
thanks

Alexandre
More
14 years 5 months ago #4984 by Claus
Replied by Claus on topic Re:Printing modal mass and stiffness matr.
Have a look at this thread, I think this is what you're looking for:

www.code-aster.org/forum2/viewtopic.php?id=12916

Regards,

Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
  • Alexandre Marks Löw
  • Topic Author
  • Offline
  • New Member
  • New Member
More
14 years 5 months ago #4985 by Alexandre Marks Löw
Replied by Alexandre Marks Löw on topic Re:Printing modal mass and stiffness matr.
Yes, it helped a lot! thanks.

but i didn't understand yet what i need to write in the .comm file to tell Aster to print the matrices...
More
14 years 5 months ago #4987 by Claus
Replied by Claus on topic Re:Printing modal mass and stiffness matr.
Hmm I mistakenly thought the command file was included in the CA forum post - you might have to wait for someone else to respond, because I don't know much about the subject, or do some searches on the CA forum.

Regards,

Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Moderators: catux
  1. Forum
  3. Public Forums
  5. Finite Element Modelling - Code_Aster
  7. Printing modal mass and stiffness matr.
Time to create page: 0.135 seconds
Powered by Kunena Forum