How to write results to Gmsh
- Tom Krivec
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
16 years 4 months ago #2422
by Tom Krivec
How to write results to Gmsh was created by Tom Krivec
Hi,
I found out that it is not possible to view the results of the EQUI_ELNO_SIGM field with Salome 3.2.9 (on Salome-Meca 2008.1 stand alone). So I tried to export the results into a gmsh results file (as descirbed in the "simple operating example" doc no. U10500c_en from the non-french section of the code aster homepage, but I didn't succeed. I did not find any result file or data that I could open with Gmsh. No idea what I did wrong. Is there any tutorial for dummies or other kind of information that could help me?
greetings,
Tom
I found out that it is not possible to view the results of the EQUI_ELNO_SIGM field with Salome 3.2.9 (on Salome-Meca 2008.1 stand alone). So I tried to export the results into a gmsh results file (as descirbed in the "simple operating example" doc no. U10500c_en from the non-french section of the code aster homepage, but I didn't succeed. I did not find any result file or data that I could open with Gmsh. No idea what I did wrong. Is there any tutorial for dummies or other kind of information that could help me?
greetings,
Tom
Moderators: catux
Time to create page: 0.130 seconds