- Forum
- Public Forums
- Finite Element Modelling - Code_Aster
- Analysis running on Windows no on Caelinux...Why?
Analysis running on Windows no on Caelinux...Why?
- Jacopo
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
17 years 1 week ago #1956
by Jacopo
Analysis running on Windows no on Caelinux...Why? was created by Jacopo
Hello to all forum,
the file attached running whitout problem on Code-Aster 9.0 Windows distribution but on Caelinux distribution send an error said me that there is no CPU time when arrive to 60% solution.
The pc on Caelinux distribution is more powerfull than the Pc on WINDOWS distribution, How can solve this problem?How can run Code-ASter with more than 1 CPU? The Pc with caelinux distribution is multiprocessor.
Regards
Jacopo
the file attached running whitout problem on Code-Aster 9.0 Windows distribution but on Caelinux distribution send an error said me that there is no CPU time when arrive to 60% solution.
The pc on Caelinux distribution is more powerfull than the Pc on WINDOWS distribution, How can solve this problem?How can run Code-ASter with more than 1 CPU? The Pc with caelinux distribution is multiprocessor.
Regards
Jacopo
Attachment SHELL_TEST_LARG_DISP.rar not found
- Joël Cugnoni
-
- Offline
- Moderator
-
17 years 1 week ago #1957
by Joël Cugnoni
Joël Cugnoni - a.k.a admin
www.caelinux.com
Replied by Joël Cugnoni on topic Re:Analysis running on Windows no on Caelinux...Why?
Hi
you can change the maximum CPU time of the solver:
- in Salome Meca: edit code-aster case and set CPU to some high value like 10000
- or in astk: on the top right corner of the window, change the CPU time value to 10000
this should solver this issue .
In principle, Aster can use multiple CPUs , but it has to Be compiled with commercial compilers (that support openMP) , so this option is not active in the version provided with CAElinux.
Regards
you can change the maximum CPU time of the solver:
- in Salome Meca: edit code-aster case and set CPU to some high value like 10000
- or in astk: on the top right corner of the window, change the CPU time value to 10000
this should solver this issue .
In principle, Aster can use multiple CPUs , but it has to Be compiled with commercial compilers (that support openMP) , so this option is not active in the version provided with CAElinux.
Regards
Joël Cugnoni - a.k.a admin
www.caelinux.com
- Jacopo
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
17 years 1 week ago #1958
by Jacopo
Replied by Jacopo on topic Re:Analysis running on Windows no on Caelinux...Why?
Thx for your help, I think you are speaking about the zone where is write TIME (under CPU) see picture attached.
I have sett it to 1000 I think have you rigth it is to small!!!
Regards
Jacopo
I have sett it to 1000 I think have you rigth it is to small!!!
Regards
Jacopo
- Jacopo
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
17 years 1 week ago #1959
by Jacopo
Replied by Jacopo on topic Re:Analysis running on Windows no on Caelinux...Why?
I forgot attach the picture, now attached it!!!
Regards
Jacopo
Regards
Jacopo
- Jacopo
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
17 years 1 week ago #1960
by Jacopo
Replied by Jacopo on topic Re:Analysis running on Windows no on Caelinux...Why?
File
- Jacopo
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 12
- Thank you received: 0
17 years 6 days ago #1966
by Jacopo
Replied by Jacopo on topic Re:Analysis running on Windows no on Caelinux...Why?
Thx for your help now the analysis run without problem!!!
Moderators: catux
- Forum
- Public Forums
- Finite Element Modelling - Code_Aster
- Analysis running on Windows no on Caelinux...Why?
Time to create page: 0.178 seconds