Aster problem on FC3 (Not using CAElinux)
- Venkat
- Topic Author
- Visitor
18 years 2 months ago #175
by Venkat
Aster problem on FC3 (Not using CAElinux) was created by Venkat
I have installed Salome 2.2.2 and Aster 8.2 on a machine running FC3 and am going through the Piston tutorial.
After editing the FE model, when I click on Run in ASTK, nothing happens. I can see a job being added to the ASJOB window, but nothing else happens.
Would it be something to do with the configuration and how can I troubleshoot? Any pointers appreciated.
I have attached the last part of ~/.astkrc/log.astk if its any use.
Regards,
Venkat
====================================
Actions :
- run the study
====================================
(enregistrer) Fichier profil : -1 /data/fea/piston/piston.astk
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"cp -r /tmp/astk_root/.file_save /data/fea/piston/piston.astk; echo EXIT_CODE=$?\"
Process number : 26876
============================== STANDARD OUTPUT ==============================
EXIT_CODE=0
=============================================================================
(exporter) Fichier export : -1 /data/fea/piston/piston.export
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"if test -f /data/fea/piston/./piston.comm ; then echo F ; else if test -d /data/fea/piston/./piston.comm ; then echo R ; else echo X ; fi ; fi ; if test -f /data/fea/piston/./pistonmesh.med ; then echo F ; else if test -d /data/fea/piston/./pistonmesh.med ; then echo R ; else echo X ; fi ; fi ; \"
Process number : 26882
============================== STANDARD OUTPUT ==============================
F
F
=============================================================================
Type F : /data/fea/piston/./piston.comm
Type F : /data/fea/piston/./pistonmesh.med
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"cp -r /tmp/astk_root/.file_export /data/fea/piston/piston.export; echo EXIT_CODE=$?\"
Process number : 26891
============================== STANDARD OUTPUT ==============================
EXIT_CODE=0
=============================================================================
(exporter) retour : 0
External command on Calypso.Ulysses-systems.com :
/opt/aster/ASTK/ASTK_SERV/bin/as_serv as_exec --remote_shell_protocol RSH --remote_copy_protocol RCP /data/fea/piston/piston.export
Process number : 26897
============================== STANDARD OUTPUT ==============================
JOBID=26898 QUEUE=interactif
EXIT_CODE=0
=============================================================================
External command on Calypso.Ulysses-systems.com :
/opt/aster/ASTK/ASTK_SERV/bin/as_serv as_actu --remote_shell_protocol RSH --remote_copy_protocol RCP 26898 piston interactif
Process number : 27034
============================== STANDARD OUTPUT ==============================
ETAT=ENDED DIAG=_ EXEC=_ TCPU=_ REP_TRAV=_ QUEUE=_
EXIT_CODE=0
=============================================================================
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"/opt/aster/ASTK/ASTK_SERV/bin/as_serv as_del --remote_shell_protocol RSH --remote_copy_protocol RCP 26898 piston interactif Calypso ; \"
Process number : 27063
============================== STANDARD OUTPUT ==============================
EXIT_CODE=0
=============================================================================
After editing the FE model, when I click on Run in ASTK, nothing happens. I can see a job being added to the ASJOB window, but nothing else happens.
Would it be something to do with the configuration and how can I troubleshoot? Any pointers appreciated.
I have attached the last part of ~/.astkrc/log.astk if its any use.
Regards,
Venkat
====================================
Actions :
- run the study
====================================
(enregistrer) Fichier profil : -1 /data/fea/piston/piston.astk
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"cp -r /tmp/astk_root/.file_save /data/fea/piston/piston.astk; echo EXIT_CODE=$?\"
Process number : 26876
============================== STANDARD OUTPUT ==============================
EXIT_CODE=0
=============================================================================
(exporter) Fichier export : -1 /data/fea/piston/piston.export
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"if test -f /data/fea/piston/./piston.comm ; then echo F ; else if test -d /data/fea/piston/./piston.comm ; then echo R ; else echo X ; fi ; fi ; if test -f /data/fea/piston/./pistonmesh.med ; then echo F ; else if test -d /data/fea/piston/./pistonmesh.med ; then echo R ; else echo X ; fi ; fi ; \"
Process number : 26882
============================== STANDARD OUTPUT ==============================
F
F
=============================================================================
Type F : /data/fea/piston/./piston.comm
Type F : /data/fea/piston/./pistonmesh.med
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"cp -r /tmp/astk_root/.file_export /data/fea/piston/piston.export; echo EXIT_CODE=$?\"
Process number : 26891
============================== STANDARD OUTPUT ==============================
EXIT_CODE=0
=============================================================================
(exporter) retour : 0
External command on Calypso.Ulysses-systems.com :
/opt/aster/ASTK/ASTK_SERV/bin/as_serv as_exec --remote_shell_protocol RSH --remote_copy_protocol RCP /data/fea/piston/piston.export
Process number : 26897
============================== STANDARD OUTPUT ==============================
JOBID=26898 QUEUE=interactif
EXIT_CODE=0
=============================================================================
External command on Calypso.Ulysses-systems.com :
/opt/aster/ASTK/ASTK_SERV/bin/as_serv as_actu --remote_shell_protocol RSH --remote_copy_protocol RCP 26898 piston interactif
Process number : 27034
============================== STANDARD OUTPUT ==============================
ETAT=ENDED DIAG=_ EXEC=_ TCPU=_ REP_TRAV=_ QUEUE=_
EXIT_CODE=0
=============================================================================
External command on Calypso.Ulysses-systems.com :
/bin/sh -c \"/opt/aster/ASTK/ASTK_SERV/bin/as_serv as_del --remote_shell_protocol RSH --remote_copy_protocol RCP 26898 piston interactif Calypso ; \"
Process number : 27063
============================== STANDARD OUTPUT ==============================
EXIT_CODE=0
=============================================================================
Please Log in or Create an account to join the conversation.
- Torsten
- Topic Author
- Visitor
18 years 2 months ago #177
by Torsten
Replied by Torsten on topic Re:Aster problem on FC3 (Not using CAElinux)
Hi,
some questions:
What happens if you push the update button in the asjob window?
What happens if you write \"ssh localhost\" in a shell?
Torsten
some questions:
What happens if you push the update button in the asjob window?
What happens if you write \"ssh localhost\" in a shell?
Torsten
Please Log in or Create an account to join the conversation.
- Venkat
- Topic Author
- Visitor
18 years 2 months ago #178
by Venkat
Replied by Venkat on topic Re:Aster problem on FC3 (Not using CAElinux)
Hi Torsten,
Thanks for the assistance.
The problem was due to the \"Disallow TCP Connections to X server\" in the Gnome Display Manager settings - changing it fixed the problem.
Aster is working great now!!
Regards,
Venkat
Thanks for the assistance.
The problem was due to the \"Disallow TCP Connections to X server\" in the Gnome Display Manager settings - changing it fixed the problem.
Aster is working great now!!
Regards,
Venkat
Please Log in or Create an account to join the conversation.
Moderators: catux
Time to create page: 0.132 seconds