The solution start bat after...
- Jacopo
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 38
- Thank you received: 0
17 years 4 months ago #1631
by Jacopo
The solution start bat after... was created by Jacopo
Hello to all forum,
I'm just start to doing another test involved the contact.
I prepare the mesh on ideas and import with PRE_IDEAS().
The solution start but after appare the error:
-- CODE_ASTER -- VERSION DE DEVELOPPEMENT FIGEE 9.00 --
COPYRIGHT EDF-R&D 1991 - 2006
EXECUTION DU : VE-04-JANV-2008 01:16:04
PLATE-FORME : SPARTACUS
NB MAX PROC : 1
SYSTEME : WINDOWS_NT
CPU : ????
!
!
! <F> <FACTOR_20> !
! !
! !
! Matrice non factorisable : !
! pivot presque nul à la ligne : 681 !
! nombre de décimales perdues : 17 !
! pour le noeud N227 et la composante DZ !
! !
! !
! Cette erreur est fatale. Le code s'arrete. !
!
!
I don't know if the problem is how I have define the contact.
I attached the model and hope that there is some one can solve my problem.
Regards
Jacopo
I'm just start to doing another test involved the contact.
I prepare the mesh on ideas and import with PRE_IDEAS().
The solution start but after appare the error:
-- CODE_ASTER -- VERSION DE DEVELOPPEMENT FIGEE 9.00 --
COPYRIGHT EDF-R&D 1991 - 2006
EXECUTION DU : VE-04-JANV-2008 01:16:04
PLATE-FORME : SPARTACUS
NB MAX PROC : 1
SYSTEME : WINDOWS_NT
CPU : ????
!
!
! <F> <FACTOR_20> !
! !
! !
! Matrice non factorisable : !
! pivot presque nul à la ligne : 681 !
! nombre de décimales perdues : 17 !
! pour le noeud N227 et la composante DZ !
! !
! !
! Cette erreur est fatale. Le code s'arrete. !
!
!
I don't know if the problem is how I have define the contact.
I attached the model and hope that there is some one can solve my problem.
Regards
Jacopo
Attachment TESTERROR.rar not found
Moderators: catux
Time to create page: 0.117 seconds