Cantilever Beam Linear Analysis
- Neshen Armoogum
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
10 years 11 months ago #7566
by Neshen Armoogum
Cantilever Beam Linear Analysis was created by Neshen Armoogum
Hi,
Am new to CAELinux. Having been using the software for the past few weeks doing some basic simulations on beam. Have been running analysis with uniformly distributed load and having good reuslts. But can apply a point load at the free end of a cantilever beam. Does anyone have any idea how to do that.
Thank you for your cooperation,
neshen
Am new to CAELinux. Having been using the software for the past few weeks doing some basic simulations on beam. Have been running analysis with uniformly distributed load and having good reuslts. But can apply a point load at the free end of a cantilever beam. Does anyone have any idea how to do that.
Thank you for your cooperation,
neshen
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
10 years 11 months ago - 10 years 11 months ago #7567
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re: Cantilever Beam Linear Analysis
Have a look here and see if that helps you.
www.caelinux.org/wiki/index.php/Contrib:...ster/10_x_cases/beam
/C
www.caelinux.org/wiki/index.php/Contrib:...ster/10_x_cases/beam
/C
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Last edit: 10 years 11 months ago by Claus.
Moderators: catux
Time to create page: 0.124 seconds