My mesh is not running in the Code Saturne
- Renan Neves Nascimento
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
12 years 4 months ago #5967
by Renan Neves Nascimento
My mesh is not running in the Code Saturne was created by Renan Neves Nascimento
I made a mesh in Salomé, two different kinds, but none runs in Code Saturne.
That's the problem that appears:
/usr/local/bin/cs_preprocess --in ecs_cmd -m
/home/renanneves/CYL/MESH/Cylindre2.med --num 1 --ensight --case check_mesh
.
.
| |
| Préprocesseur Code_Saturne |
| |
`
'
ECS version 2.0.2 (jeu. 01 déc. 2011 22:21:21 CET)
Support du format de fichiers MED 2.3.5 (HDF5 1.8.4)
Lecture de fichiers compressés ('.gz') avec Zlib 1.2.3.3
Configuration du cas
Date : sam. 03 déc. 2011 19:42:13 CET
Système : Linux 2.6.32-34-generic
Machine : ubuntu
Processeur : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz
Mémoire : 3853204
Utilisateur : renanneves (RenanNeves)
Répertoire : /home/renanneves/CYL/2D/RESU
Nom du cas : check_mesh
Fichier de maillage : /home/renanneves/CYL/MESH/Cylindre2.med
Lecture du fichier de maillage au format MED (EDF/CEA)
Fichier de maillage : /home/renanneves/CYL/MESH/Cylindre2.med
Nom du maillage : Mesh_1
Erreur a l'exécution de l'ECS
=============================
ecs_pre_med.c:427: Erreur fatale.
MED : erreur à la lecture du fichier "/home/renanneves/CYL/MESH/Cylindre2.med".
Erreur à la lecture des coordonnées.
Pile d'appels
1: 0x7fe510ab4152 (libbft.so.1)
2: 0x427b13 (cs_preprocess)
3: 0x40d51b (cs_preprocess)
4: 0x409570 (cs_preprocess)
5: 0x7fe50facbc4d (libc.so.6)
6: 0x403839 (cs_preprocess)
Fin de la pile
___
Anybody knows what I need to do?
Thanks for all answers!
That's the problem that appears:
/usr/local/bin/cs_preprocess --in ecs_cmd -m
/home/renanneves/CYL/MESH/Cylindre2.med --num 1 --ensight --case check_mesh
.
.
| |
| Préprocesseur Code_Saturne |
| |
`
'
ECS version 2.0.2 (jeu. 01 déc. 2011 22:21:21 CET)
Support du format de fichiers MED 2.3.5 (HDF5 1.8.4)
Lecture de fichiers compressés ('.gz') avec Zlib 1.2.3.3
Configuration du cas
Date : sam. 03 déc. 2011 19:42:13 CET
Système : Linux 2.6.32-34-generic
Machine : ubuntu
Processeur : Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz
Mémoire : 3853204
Utilisateur : renanneves (RenanNeves)
Répertoire : /home/renanneves/CYL/2D/RESU
Nom du cas : check_mesh
Fichier de maillage : /home/renanneves/CYL/MESH/Cylindre2.med
Lecture du fichier de maillage au format MED (EDF/CEA)
Fichier de maillage : /home/renanneves/CYL/MESH/Cylindre2.med
Nom du maillage : Mesh_1
Erreur a l'exécution de l'ECS
=============================
ecs_pre_med.c:427: Erreur fatale.
MED : erreur à la lecture du fichier "/home/renanneves/CYL/MESH/Cylindre2.med".
Erreur à la lecture des coordonnées.
Pile d'appels
1: 0x7fe510ab4152 (libbft.so.1)
2: 0x427b13 (cs_preprocess)
3: 0x40d51b (cs_preprocess)
4: 0x409570 (cs_preprocess)
5: 0x7fe50facbc4d (libc.so.6)
6: 0x403839 (cs_preprocess)
Fin de la pile
___
Anybody knows what I need to do?
Thanks for all answers!
Please Log in or Create an account to join the conversation.
- Joël Cugnoni
- Offline
- Moderator
12 years 4 months ago #5968
by Joël Cugnoni
Joël Cugnoni - a.k.a admin
www.caelinux.com
Replied by Joël Cugnoni on topic Re: My mesh is not running in the Code Saturne
Hello,
it seems that you have generated a 2D mesh, but Code-Saturne is only 3D.
So to carry out a 2D analysis, you need to generate a 3D mesh by extruding the 2D elements and then apply symmetry boundary conditions on the lateral faces.
The back facing step example on the wiki is a good starting point:
www.caelinux.org/wiki/index.php/Doc:CAET..._.28CAELinux_2008.29
it seems that you have generated a 2D mesh, but Code-Saturne is only 3D.
So to carry out a 2D analysis, you need to generate a 3D mesh by extruding the 2D elements and then apply symmetry boundary conditions on the lateral faces.
The back facing step example on the wiki is a good starting point:
www.caelinux.org/wiki/index.php/Doc:CAET..._.28CAELinux_2008.29
Joël Cugnoni - a.k.a admin
www.caelinux.com
The following user(s) said Thank You: Pranav
Please Log in or Create an account to join the conversation.
- Renan Neves Nascimento
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
12 years 4 months ago #5970
by Renan Neves Nascimento
Replied by Renan Neves Nascimento on topic Re: My mesh is not running in the Code Saturne
CYLINDRE1.hdf
Strange, because I really did a 2D mesh, but I extruded too. Could you take a look?
Thanks!
Strange, because I really did a 2D mesh, but I extruded too. Could you take a look?
Thanks!
Please Log in or Create an account to join the conversation.
- Renan Neves Nascimento
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
12 years 4 months ago #5971
by Renan Neves Nascimento
Replied by Renan Neves Nascimento on topic Re: My mesh is not running in the Code Saturne
Please Log in or Create an account to join the conversation.
- Joël Cugnoni
- Offline
- Moderator
12 years 4 months ago #5977
by Joël Cugnoni
Joël Cugnoni - a.k.a admin
www.caelinux.com
Replied by Joël Cugnoni on topic Re: My mesh is not running in the Code Saturne
Hi
I will try to have a look...
but just one question: which version of CAElinux and Salome did you use?
I will try to have a look...
but just one question: which version of CAElinux and Salome did you use?
Joël Cugnoni - a.k.a admin
www.caelinux.com
Please Log in or Create an account to join the conversation.
- Renan Neves Nascimento
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
12 years 4 months ago #5979
by Renan Neves Nascimento
Replied by Renan Neves Nascimento on topic Re: My mesh is not running in the Code Saturne
Actually, I downloaded the files from EDF's site and I'm using them.
Code Saturne is 2.1.0, and Salomé is 6.3.1.
I think that my problem is that me preprocessor do not read the version .med 3.0, that is the version that Salomé does.
Code Saturne is 2.1.0, and Salomé is 6.3.1.
I think that my problem is that me preprocessor do not read the version .med 3.0, that is the version that Salomé does.
Please Log in or Create an account to join the conversation.
Moderators: catux
Time to create page: 0.143 seconds