problems with moving tools bar in salome 6.0
- sps
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 15
- Thank you received: 0
13 years 1 month ago #6215
by sps
problems with moving tools bar in salome 6.0 was created by sps
Hi,
when I use Salome-meca 6.3, and I am in geometry ambience, I have tried to move one of numerous toolbars. Salome crashed immediately. Is there some problem with my installation, or is it a problem of salome?
The problem is that all system is then blocked, and I have to force to rebuild with Ctrl+Alt+Stamp+R E I S U B
Thank you
when I use Salome-meca 6.3, and I am in geometry ambience, I have tried to move one of numerous toolbars. Salome crashed immediately. Is there some problem with my installation, or is it a problem of salome?
The problem is that all system is then blocked, and I have to force to rebuild with Ctrl+Alt+Stamp+R E I S U B
Thank you
- sps
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 15
- Thank you received: 0
13 years 1 month ago #6226
by sps
Replied by sps on topic Re: problems with moving tools bar in salome 6.0
No one can do this experiment moving some toolbar in Salome and try if system is all ok?
I have Caelinux 2011!
I have Caelinux 2011!
- kwou
-
- Offline
- Moderator
-
13 years 1 month ago - 13 years 1 month ago #6227
by kwou
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
Replied by kwou on topic Re: problems with moving tools bar in salome 6.0
Hoi Sps,
I have just tried moving several toolbars acros the Salome-Meca 2012 window and so far all went well.
No problems. Note that I used version 2012 but I cannot think of any reason why 2011 of Salome 6.3 would crash if 2012 does not.
Have a look at the attached picture
(seems upload does not work right now. I have following error messages:
JFTP::login: Unable to login (I am)
JFTP::mkdir: Bad response
JFTP::chmod: Bad response
Failed to upload file '': Failed to create directory to store your file.
....).
Salome_Meca_2012_toolbars.png
How did you move the toolbar?
Just pulling the rubbed part of the toolbar?
I have just tried moving several toolbars acros the Salome-Meca 2012 window and so far all went well.
No problems. Note that I used version 2012 but I cannot think of any reason why 2011 of Salome 6.3 would crash if 2012 does not.
Have a look at the attached picture
(seems upload does not work right now. I have following error messages:
JFTP::login: Unable to login (I am)
JFTP::mkdir: Bad response
JFTP::chmod: Bad response
Failed to upload file '': Failed to create directory to store your file.
....).
Salome_Meca_2012_toolbars.png
How did you move the toolbar?
Just pulling the rubbed part of the toolbar?
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
Last edit: 13 years 1 month ago by kwou.
- sps
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 15
- Thank you received: 0
13 years 1 month ago #6228
by sps
Replied by sps on topic Re: problems with moving tools bar in salome 6.0
Simply, I click on one toolbar with left button and move the mouse.
When I've just moved the mouse about some millimetre, Caelinux system distro crash all!!
Caelinux distro is on Ubuntu 10.04
When I've just moved the mouse about some millimetre, Caelinux system distro crash all!!
Caelinux distro is on Ubuntu 10.04
- kwou
-
- Offline
- Moderator
-
13 years 1 month ago #6231
by kwou
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
Replied by kwou on topic Re: problems with moving tools bar in salome 6.0
Hoi Sps
that is also what I did. And no problems. I use Ubunt 11.04 (Natty).
So unfortunately I cannot help much.
that is also what I did. And no problems. I use Ubunt 11.04 (Natty).
So unfortunately I cannot help much.
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
The following user(s) said Thank You: sps
- sps
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 15
- Thank you received: 0
13 years 1 month ago #6234
by sps
Replied by sps on topic Re: problems with moving tools bar in salome 6.0
Is there anyone that use original Caelinux distro?
Moderators: catux
Time to create page: 0.143 seconds